Engineered to exact tolerances (±0.02mm) and optimized with multi-layer corrosion protection, our heavy-duty bolts secure key connections in wind power, automotive, marine, and construction projects.
Founded in 2006, Sinsun Hardware has grown to become a leading manufacturer and global supplier of high-performance fasteners. As Northern China's largest producer of Self-Tapping Screws, we operate from a massive 30,000 sqm integrated production facility. This state-of-the-art facility features modern manufacturing zones, a 12,000 sqm smart warehouse holding over 18,000 pallet positions, and international, multi-lingual customer support centers.
We process over 10,000 tons of high-grade raw steel annually, sourced directly from premier steel producers like Ansteel Group. By applying precise spheroidizing annealing and wire drawing steps inside our own mills, we secure absolute control over raw materials before the cold forging stage even begins. With a yearly capacity exceeding 8,500 shipping containers, we serve industrial distributors, structural engineers, and major OEMs in Europe, the Middle East, Southeast Asia, South America, and Russia.
"At Sinsun, we combine advanced German-engineered multi-station cold heading systems with precision Taiwanese production technology to craft fastening systems that resist shear forces, withstand extreme weather, and extend project lifecycles."
Decades of continuous manufacturing scaling, strict quality checks, and supply chain logistics allow us to meet structural challenges globally.
Over nearly two decades, Sinsun has evolved into an engineering partner for critical infrastructure and OEM manufacturers.
Established our first manufacturing base in Northern China, focusing on high-volume production of industrial screws and wire drawing.
Formed our dedicated international trade division, passing structural compliance checks to secure exports to Europe, Russia, and the Middle East.
Upgraded the main production line with imported multi-station cold heading machinery, boosting raw production speed to 1,200 pieces/min.
Achieved a 36,000-ton annual output with 4 in-house heat treatment lines and an integrated 12,000 sqm smart ERP warehouse facility.
We maintain vertical quality control from the chemical composition of raw wire rods to the final microscopic thread inspections.
We source raw C1022A, 10B21, and stainless steel rod coils from Ansteel Group. Inside our gas-fired annealing furnaces, coils undergo controlled heating and cooling to reform cementite plates into spherical shapes, improving ductility and preventing micro-cracking during cold forming.
Using German multi-station cold headers, we shape bolt heads and collars without cutting grain lines. This cold-working process aligns the steel's crystal structure with the contours of the bolt, boosting mechanical strength and resistance to shear stresses.
Our four continuous mesh-belt heat treatment lines process 20 tons daily. By monitoring gas carbon potential and temperature profiles, we harden core structures to HRC 28-32 while tempering the surface to prevent brittleness, reaching tensile strength classes of 8.8, 10.9, and 12.9.
Trained operators run high-speed thread rolling dies to form threads plastically instead of cutting them. This rolling action compresses the metal fibers, reducing micro-scratches and increasing thread shear capacity to resist loosening under vibration.
To resist corrosive environments, we apply tailored surface coatings, including Blue-White Electro-Zinc, Hot-Dip Galvanizing (HDG), and chrome-free Dacromet flakes. These options provide over 1,000 hours of salt spray resistance (ASTM B117) without causing hydrogen embrittlement.
Before packing, products pass through automated sorting machines equipped with 3D optical cameras. This system screens dimensions, pitch deviation, and thread integrity, removing defective pieces to maintain a zero-defect shipment target.
Every infrastructure and engineering project brings unique environmental challenges. Our bolts are designed to perform reliably under specific operating conditions.
For port facilities, bridge construction, and freight terminals, our high-strength Eye Bolts provide secure anchor points. Forged to conform with ASME B30.26 standards, they handle directional stress and lifting loads under dynamic conditions.
Our OEM Flange and Hex Bolts are engineered for engine blocks, chassis systems, and power plants. With high tensile limits (up to 1,200 MPa) and resistance to shear deformation, they maintain clamping force through thermal expansion and machinery vibration.
Civil engineering structures rely on our heavy-duty J-Bolts, U-Bolts, and Stud Bolts. Cast directly into concrete foundations or wrapped around utility pipes, they transfer tensile loads to structural bases and anchor heavy equipment in seismic zones.
Industrial projects rely on a steady supply of components. Sinsun Hardware's integrated facilities in Northern China safeguard your supply chain against material shortages and logistics bottlenecks. Our proximity to the iron and steel clusters of Tangshan and Xingtai ensures a consistent supply of premium raw carbon steel, insulating production from regional shortages.
Our 12,000 sqm smart warehouse runs on a customized ERP system that manages over 18,000 pallet spaces. By tracking inventory levels in real time, we keep high stock volumes of standard DIN, ISO, and ANSI bolts on hand. This setup allows us to process and dispatch standard orders quickly, achieving a 99.2% on-time delivery rate. For global distribution, our automated packaging lines sort and pack over 3,000 cartons per hour, loading shipping containers for export through the nearby deepwater port of Tianjin.
As industries shift toward smart production and lower carbon emissions, Sinsun is adapting its manufacturing processes to meet these demands.
We are integrating IoT monitoring sensors into our cold heading and thread rolling equipment. This system tracks tool wear, dies pressure, and head geometry in real time to prevent defect runs and reduce production waste.
We are expanding our use of recycled steel and transitioning our heat treatment lines to run on natural gas and high-efficiency induction systems. These changes help reduce the carbon footprint of our manufacturing process.
In response to growing offshore solar and wind installations, our labs are testing zinc-nickel and nano-ceramic coatings. These finishes aim to double the lifespan of structural fasteners in marine and high-salinity environments.
We provide technical support and ensure compliance with international standards for engineering projects around the world.
Every product batch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), showing the chemical composition and mechanical properties of the steel back to the furnace melt.
Our fasteners are manufactured to meet global engineering standards, including DIN (Europe), ANSI/ASME (USA), JIS (Japan), and ISO, ensuring compatibility with your designs.
We use non-toxic, trivalent plating processes (Cr3+) to ensure our coatings comply with RoHS and REACH regulations, making them suitable for automotive and electronic applications.
We provide retail-ready packaging and heavy-duty structural bulk packs, complete with custom labels and 3D design previews, tailored to your warehouse and assembly line requirements.
Read how our engineered fastening solutions helped OEM partners and contractors solve design and assembly challenges.
Challenge: A tier-1 automotive supplier needed a custom flange bolt that offered strong vibration resistance and weight savings for a new passenger vehicle engine.
Sinsun Solution: We redesigned the flange geometry using a specialized carbon steel alloy and added an micro-encapsulated thread-locking compound to the threads.
Result: Achieved a 15% reduction in fastener weight, passed 2,000 hours of vibration testing, and integrated smoothly into the customer's high-speed assembly line.
Challenge: An energy developer required large J-bolts and stud bolts to secure structural components in an offshore environment exposed to salt spray and high humidity.
Sinsun Solution: We recommended high-tensile carbon steel finished with a duplex coating, featuring hot-dip galvanizing under a polymer topcoat.
Result: The fasteners withstood over 1,500 hours of salt spray testing without showing red rust, helping the project meet its design life requirements.
From initial design consult to final shipping, we use a structured workflow to keep your projects on schedule.
Our engineers review your drawings, tolerances, structural loads, and environmental conditions to select the appropriate materials and coatings.
We manufacture initial prototype samples for your team to test, providing full dimensional inspection reports and material certifications.
Once samples are approved, we begin mass production. Quality checks run at every stage, including cold heading, thread rolling, and heat treatment.
Before packing, we run final checks on dimensions, hardness, and coating thickness, preparing the documentation for your records.
We pack your order to protect it during transit and coordinate shipping through our logistics partners to deliver it to your facility or job site.
We manufacture a broad range of heavy-duty concrete anchors, machine screws, wood fasteners, and structural components to complete your projects.
Find answers to common questions about our technical specifications, ordering options, and supply capabilities.
Contact Sinsun Hardware's engineering team today for technical support, customized designs, or a detailed quotation within 48 hours.
Submit Your RFQ Now
SINSUN
